The 10 Best Automotive Replacement Engine Push Rods to Buy – December 2021 Review

Looking for the best Automotive Replacement Engine Push Rods?

We did 26 hours of research and testing 19 products to create this review. We believe the best Automotive Replacement Engine Push Rods doesn’t have to be the most sophisticated to be exceptional. Our product selection lives up to its promise. Many different criteria were used for this comparison to be more relevant and more precise. Now discover our comparison !

TOP 10

No. 1
COMP Cams 7372-16 Magnum 7.800" Long, .080" Wall, 5/16" Diameter Pushrod Set
  • Quality Construction - COMP Cams Magnum Series Pushrods are constructed from a single piece of chromemoly steel with a wall thickness 0.080", ensuring these pushrods withstand high loads for the life of the engine and do not flex.
  • Guide Plate Compatible - Magnum Pushrods are all heat-treated before they leave our facility, guaranteeing that using them with guideplates will not ruin them prematurely.
  • High Quality, Long Lasting Finish - Magnum Series Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely. Additionally, we laser etch our pushrods with the part number, making it easy to order replacements.
  • Race Ready - Quality and precision manufactured from start to finish, these pushrods are at home in both daily driven street vehicles, as well as racing applications. The Magnum Series is a great upgrade from our High Energy line, especially if aggressive camshafts and higher load springs are part of your build.
  • Application Specific Sets - While we sell our Magnum Series Pushrods from 6.200" to 9.800" long in sets of 16 and individually, we also offer sets custom tailored for your application. COMP Cams has custom Magnum Pushrod Sets for Chevrolet, Chrysler, Ford, Oldsmobile and Pontiac - making ordering our high end pushrods easier than ever!
  • 5/16" and 3/8" - In addition to offering application specific sets, we offer both 5/16" and 3/8" diameter designs: 6.250" to 9.300" in 5/16" and 6.850" to 9.800" in 3/8".
  • Fits Chevrolet 265-400 Small Block + 90 Degree 200-262 V6
  • Made in USA
No. 2
Melling 7.400" Pushrods Fits 4.8 5.3 5.7 6.0 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
  • Melling LS 7.400" Steel Pushrods
  • Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
  • Set of sixteen (16) stock replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines.
  • These are the stock length 7.400" Long 5/16" pushrods
  • Melling OEM replacement pushrods are perfect for stock rebuild or mild performance applications where open spring pressures do not exceed 300 lbs. They're manufactured from steel tubing and work well with factory or aftermarket rocker arms. These units are available in a wide range of lengths and other options for fitment on countless makes and models. When you're replacing your valvetrain components, trust Melling pushrods to keep your engine running smoothly.
No. 3
Elgin Industries Sloppy Stage 2 Camshaft, Lifters,Springs & Push Rods compatible with 1997-2007 GM 5.7L V-8 LS1 Gen III Sloppy LSx .585/.585 Lift Cams w/3-bolt
  • For NON-AFM Engines
  • Overall length: 7.400" ONE PIECE DESIGN Push Rod
  • Includes Elgin E1840P Camshaft Stage 2 .585" Lift cam
  • Overall length: 7.400" ONE PIECE DESIGN
No. 5
Mishimoto MMRT-F2D-08EN Degas Reservoir Tank Compatible With Ford 6.4L Powerstroke F250 F350 F450 F550 2008-2010 Natural
  • Direct fit for 2008–2010 Ford 6.4L Powerstroke
  • Sight tube allows for quick and easy reading of coolant level
  • Additional 1/8" NPT port for easy sensor installation
  • Available in natural or micro-wrinkle black powder-coated finish
  • Mishimoto Lifetime Warranty
No. 6
COMP Cams 1431-KIT Magnum Roller Rocker Arm Kit, Includes 1.6 Ratio Rocker Arm with 3/8" Studs, and Pushrods for Small Block Ford Applications Engine
  • For Small Block Ford 289-302 And 351 Windsor Applications
  • Kit Includes Rocker Arms, Studs And Pushrods
  • Package Weight: 8.8 Pounds
  • Package Dimensions: 24.637 L X 5.588 H X 34.798 W (Centimeters)
No. 7
Brian Tooley BTR Stage 3 Naturally Aspirated Cam LS1 LS6 LS2 5.7 6.0 Camshaft, Spring Set, Chromoly Pushrods and Gaskrt Kit (Camshaft, Springs with Titanium Retainers, Gaskets)
  • BRIAN TOOLEY BTR Naturally Aspirated Stage 3 Cam - LS1 LS6 LS2 5.7 6.0 SUPERCEDED TO P/N - 33144133R0
  • LS1 LS2 Stage III Cam 231/242 .617"/.592" 112+2
  • Includes Brian Tooley Camshaft, BTR Platinum dual springs with Titanium Retainers, and 7.400" Chromoly Pushrods Includes Brian Tooley Cam Install Gasket Kit: Front Timing Cover Gasket,Timing Cover Damper Seal, Water Pump Gaskets and LS CRANKSHAFT DAMPER BOLT
  • Great camshaft for LS1/LS2 applications where rough idle is desired with more mid range/top end power than the stage 2 cam, will need a stall converter! This camshaft is getting aggressive for a daily driver application. With 10 degrees of overlap it has a fairly aggressive idle, and makes great average power and top end power.
  • The increased exhaust duration will pull very well in the upper RPM's without power falling off like other cams might. Cam specs are 231/242 .617"/.592" 112+2 and comes a 3 bolt timing gear pattern.
No. 8
Elgin industries Hydraulic NON AFM Roller Lifters & Trays & Push Rods compatible with 1997-2016 Chevy 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 LS7
  • Fits 1997-2016 Chevy 5.3 5.7 6.0 LS1 LS2 LS3 LS7 LS6 LQ4 LQ9 LY5 LY6 LM7
  • For non- AFM engines. All lifters are the same!
  • Push Rods measure size - .312" x 7.397"
No. 9
Cylinder Head Gasket Set+Bolts+AFM DOD Lifters & Push Rods Kit Compatible with 2005-2009 Chevy GMC 5.3 5.3L
  • Compatible replacements for kit for 2005-11 GM family Trucks & SUV
  • Models using the 5.3L VIN-"M" "3" or "J" Vortec-series V-8 engine
  • Updated VLOM# 12571609 from GM recommended
No. 10
COMP Cams 7638-16 Magnum 7.400" Long, .080" Wall, 5/16" Diameter Pushrod Set
  • Quality Construction - COMP Cams Magnum Series Pushrods are constructed from a single piece of chromemoly steel with a wall thickness 0.080", ensuring these pushrods withstand high loads for the life of the engine and do not flex.
  • Guide Plate Compatible - Magnum Pushrods are all heat-treated before they leave our facility, guaranteeing that using them with guideplates will not ruin them prematurely.
  • High Quality, Long Lasting Finish - Magnum Series Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely. Additionally, we laser etch our pushrods with the part number, making it easy to order replacements.
  • Race Ready - Quality and precision manufactured from start to finish, these pushrods are at home in both daily driven street vehicles, as well as racing applications. The Magnum Series is a great upgrade from our High Energy line, especially if aggressive camshafts and higher load springs are part of your build.
  • Application Specific Sets - While we sell our Magnum Series Pushrods from 6.200" to 9.800" long in sets of 16 and individually, we also offer sets custom tailored for your application. COMP Cams has custom Magnum Pushrod Sets for Chevrolet, Chrysler, Ford, Oldsmobile and Pontiac - making ordering our high end pushrods easier than ever!
  • 5/16" and 3/8" - In addition to offering application specific sets, we offer both 5/16" and 3/8" diameter designs: 6.250" to 9.300" in 5/16" and 6.850" to 9.800" in 3/8".
  • Made in USA

Intro

Find out where you can get the best Automotive Replacement Engine Push Rods! Making your choice among different Automotive Replacement Engine Push Rods on the market is not always easy. It can also turn into a daunting task because of the many websites offering the same type of product. On this page, we will give you a comparison to get the best value for your money. This complete ranking provides you with a comprehensive view and allows you to pick the best Automotive Replacement Engine Push Rods. You will find a broad selection of models, brands, and prices. Whether you want to save money or find out what is the best Automotive Replacement Engine Push Rods for you, our comparison will help you make the right choice. To keep things practical and easy to understand, we created a Top 10 of the best Automotive Replacement Engine Push Rods. You won’t have to choose your products at random anymore.. On your marks! Compare! Pick your Automotive Replacement Engine Push Rods!

Our Picks

No. 1
COMP Cams 7372-16 Magnum 7.800" Long, .080" Wall, 5/16" Diameter Pushrod Set
  • Quality Construction - COMP Cams Magnum Series Pushrods are constructed from a single piece of chromemoly steel with a wall thickness 0.080", ensuring these pushrods withstand high loads for the life of the engine and do not flex.
  • Guide Plate Compatible - Magnum Pushrods are all heat-treated before they leave our facility, guaranteeing that using them with guideplates will not ruin them prematurely.
  • High Quality, Long Lasting Finish - Magnum Series Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely. Additionally, we laser etch our pushrods with the part number, making it easy to order replacements.
  • Race Ready - Quality and precision manufactured from start to finish, these pushrods are at home in both daily driven street vehicles, as well as racing applications. The Magnum Series is a great upgrade from our High Energy line, especially if aggressive camshafts and higher load springs are part of your build.
  • Application Specific Sets - While we sell our Magnum Series Pushrods from 6.200" to 9.800" long in sets of 16 and individually, we also offer sets custom tailored for your application. COMP Cams has custom Magnum Pushrod Sets for Chevrolet, Chrysler, Ford, Oldsmobile and Pontiac - making ordering our high end pushrods easier than ever!
  • 5/16" and 3/8" - In addition to offering application specific sets, we offer both 5/16" and 3/8" diameter designs: 6.250" to 9.300" in 5/16" and 6.850" to 9.800" in 3/8".
  • Fits Chevrolet 265-400 Small Block + 90 Degree 200-262 V6
  • Made in USA
No. 2
Melling 7.400" Pushrods Fits 4.8 5.3 5.7 6.0 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
  • Melling LS 7.400" Steel Pushrods
  • Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92
  • Set of sixteen (16) stock replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines.
  • These are the stock length 7.400" Long 5/16" pushrods
  • Melling OEM replacement pushrods are perfect for stock rebuild or mild performance applications where open spring pressures do not exceed 300 lbs. They're manufactured from steel tubing and work well with factory or aftermarket rocker arms. These units are available in a wide range of lengths and other options for fitment on countless makes and models. When you're replacing your valvetrain components, trust Melling pushrods to keep your engine running smoothly.
No. 3
Elgin Industries Sloppy Stage 2 Camshaft, Lifters,Springs & Push Rods compatible with 1997-2007 GM 5.7L V-8 LS1 Gen III Sloppy LSx .585/.585 Lift Cams w/3-bolt
  • For NON-AFM Engines
  • Overall length: 7.400" ONE PIECE DESIGN Push Rod
  • Includes Elgin E1840P Camshaft Stage 2 .585" Lift cam
  • Overall length: 7.400" ONE PIECE DESIGN

Why you should trust us?

This guide is the result of more than 10 years of experience in researching, testing, and writing about various subject. Our team members are experts in their fields. We spent 26 hours reading all the articles we could find online and all the customer reviews on various retail websites such as Amazon, Ebay, Alibaba or Flipkart. We also found many websites that provided valuable resources such as purchasing guides and detailed information on Automotive Replacement Engine Push Rods. To help you make the best choice among the hundreds of products available, we decided to offer you a comparison in order to find the best value for your money. We searched different fields to find the best Automotive Replacement Engine Push Rods. We also looked at the best alternatives for reasonably priced and easy to use products. After we determined our main parameters, we conducted our research and tests.These parameters separate a great product from an average one:

  • Price
  • Ease of use
  • Customer reviews
  • Quality
  • Durability

Conclusion

We hope this ranking was helpful to you in choosing the Automotive Replacement Engine Push Rods that best suits you. We made it thoroughly and we will update it regularly, so that you get a real-time comparison. Our goal is to allow you to compare models and prices, to get an overview of what the market has to offer. We are here to make it easier for you and to make informed decisions. If our ranking gave you a clearer view on the different products available, feel free to let us know in the comments section. We will happily read them.

Click to rate this page !
Thanks !

Last update on 2021-11-10 at 08:43 / Affiliate links / Images from Amazon Product Advertising API