The 10 Best Capillary Lab Tubes to Buy – October 2022 Review

Looking for the best Capillary Lab Tubes?

We did 15 hours of research and testing 12 products to create this review. We believe the best Capillary Lab Tubes doesn’t have to be the most sophisticated to be exceptional. Our product selection lives up to its promise. Many different criteria were used for this comparison to be more relevant and more precise. Now discover our comparison !

TOP 10

No. 1
Glass Capillary Tubes/Micro Pipettes TLC Spotting 0.3mm ID x 100mm 500 or 1500/pk AAdvance Instruments (500)
  • 500 per pack capillary tubes, 0.3mm inner diameter, 0.5mm outer diameter. 100mm length.
  • Convenient packaging with 1.5mm hole on cap for easy tube drawing without need of opening the cap or keeping it open all the time.
  • As shown in photos, approximate spotting volume as tested for dichloromethane is 20mm x (0.15mm)² x 3.14 = 1.5µL, for acetone is 30mm x (0.15mm)²x 3.14 = 2µL, and for water is 50mm x (0.15mm)² x 3.14 = 3.5µL.
  • Testing method used is placing the tube at a straight up angle with only the tip submerged in the liquid and allowing the liquid to keep on climbing until it stops.
  • With a relatively large quantity of 500 or 1500 tubes, at a highly affordable price, one can say goodbye to reusing capillary tubes in TLC spotting (or any other application), other than perhaps using both ends once each. Save the time, effort, washing solvent and risk of contamination, and focus on more important aspects of your research!
No. 2
OZCZKZZ 500-Pack Glass Capillary Tubes Melting Tubes,TLC Spotting Capillary Tubes,0.9mm ID 1.1mm OD 100mm Length,One Open End
  • Length is 10cm, outside diameter is 1.1mm, inside diameter is 0.9mm.
  • Made of borosilicate.
  • Pack of 500.
  • The transformation and change of crystal shape in the heating process can be observed, the initial melting temperature value and the total melting temperature value of the sample can be correctly read, and the boiling range value can be calculated
  • Use paper tube packaging,get convenient.
No. 3
Corning 9530-1 Pyrex Capillary Melting Point Tube, Both Ends Open, 1.5 mm-1.8 mm OD, 0.2 mm Wall Range (Pack of 100)
  • The package length is 2.3 centimeters
  • The package height is 17.1 centimeters
  • The package width is 9.7 centimeters
  • Package Weight : 0.029 kilograms
SaleNo. 4
Corning 9530-3 Pyrex Capillary Melting Point Tube, One End Open, 0.2 mm Wall Thickness (Pack of 100)
  • Made in United States
  • 90 mm length
  • Package Dimensions : 5.75 L x 5.25 H x 4.5 W (inches)
  • Package Weight : 1.5 pounds
No. 5
Glass Capillary Tubes/Micro Pipettes TLC Spotting 0.5mm ID x 100mm 500 or 1000/pk AAdvance Instruments (500)
  • 500 per pack capillary tubes, 0.5 mm inner diameter, 0.75 mm outer diameter, 100mm length. Made of borosilicate glass
  • As shown in photos, approximate spotting volume as tested for dichloromethane is 15mm x (0.25mm)² x 3.14 = 3µL, for acetone is 25mm x (0.25mm)² x 3.14 = 5µL, and for water is 45mm x (0.25mm)² x 3.14 = 9µL.
  • Testing method used is placing the tube at a straight up angle with only the tip submerged in the liquid and allowing the liquid to keep on climbing until it stops.
  • Upgraded convenient packaging with a 1.5mm diameter hole on cap for easy tube drawing without need to open the cap or keeping it open all the time.
No. 6
Corning 9530-2 Pyrex Capillary Melting Point Tube, Both Ends Open, 0.8 mm-1.1 mm ID, 0.25 mm Wall Range (Pack of 100)
6 Reviews
Corning 9530-2 Pyrex Capillary Melting Point Tube, Both Ends Open, 0.8 mm-1.1 mm ID, 0.25 mm Wall Range (Pack of 100)
  • Both ends open
  • Package Weight : 0.03 kilograms
  • Country of Origin: United States
  • Package Dimensions: 2.3 L x 17.4H x7.1W x(centimeters)
No. 7
OZCZKZZ 1000-Pack Glass Capillary Tubes, Micro Pipettes, TLC Spotting 0.5mm ID 100mm, Open Both Ends
  • Length is 10cm, outside diameter is 0.7mm, inside diameter is 0.5mm.
  • Made of borosilicate.
  • Pack of 1000.
  • The transformation and change of crystal shape in the heating process can be observed, the initial melting temperature value and the total melting temperature value of the sample can be correctly read, and the boiling range value can be calculated
  • Use paper tube packaging,get convenient.
No. 8
StonyLab Glass Capillary Tubes, 100mm Micro Glass Pipettes Capillary Transfer Tube with 0.3mm ID and 0.5mm OD for TLC Spotting, Pack of 1000
  • Length: 100mm
  • Inner Diameter (ID): 0.3mm
  • Outer Diameter (OD): 0.5mm
  • Pack of 1000
  • StonyLab ensures high quality products and premium customer service; if received damaged, please contact us immediately; we will solve it until satisfied
No. 9
Extra Thin Glass Capillary Tubes/Micro Pipettes TLC Spotting 0.2-0.25mm ID x 100mm 500 or 1500/pk (500)
  • Extra thin 500 per pack capillary tubes, 0.2-0.25 mm inner diameter, 0.3-0.35 mm outer diameter, 100mm length. Non-calibrated, non precision tubes. Both ends open.
  • The extra thin diameter of these tubes makes it especially suitable for spotting aluminum or plastic backed type of TLC plates that usually have thinner silica coating than glass plates. Compared to thicker tubes, it avoids the spot from getting too large. It also saves your effort of splitting one draw-volume into spotting several times, needing to blow-dry or air-dry in between.
  • With a relatively large quantity of 500 or 1500 tubes, at a highly affordable price, one can say goodbye to reusing capillary tubes in TLC spotting (or any other application), other than perhaps using both ends once each. Save the time, effort, washing solvent and risk of contamination, and focus on more important aspects of your research!
  • Convenient packaging with 1.5mm diameter hole on cap for easy tube drawing without need to open the cap or keeping it open all the time.
  • As shown in photos, approximate spotting volume as tested for water is 65mm x (0.12mm)² x 3.14 = 3µL. Testing method used is having the tube at a straight up angle and allowing the liquid to keep on climbing until it stops. If spotted at a tilted angle the draw volume can be larger, if reducing the spotting time the volume will be smaller. Most organic solvents will climb up to a lesser height, and have a smaller draw volume than water. On average about half the amount.
No. 10
Wilmad-LabGlass LG-9060-106 Capillary Melting Point Tube, 150mm Length, 1.5mm O.D. x 1mm I.D.
  • Country of Origin : United States
  • Package Weight : 2 pounds
  • Containing approximately 100 tubes
  • Part number: LG-9060-106

Intro

Find out where you can get the best Capillary Lab Tubes! Making your choice among different Capillary Lab Tubes on the market is not always easy. It can also turn into a daunting task because of the many websites offering the same type of product. On this page, we will give you a comparison to get the best value for your money. This complete ranking provides you with a comprehensive view and allows you to pick the best Capillary Lab Tubes. You will find a broad selection of models, brands, and prices. Whether you want to save money or find out what is the best Capillary Lab Tubes for you, our comparison will help you make the right choice. To keep things practical and easy to understand, we created a Top 10 of the best Capillary Lab Tubes. You won’t have to choose your products at random anymore.. On your marks! Compare! Pick your Capillary Lab Tubes!

Our Picks

No. 1
Glass Capillary Tubes/Micro Pipettes TLC Spotting 0.3mm ID x 100mm 500 or 1500/pk AAdvance Instruments (500)
  • 500 per pack capillary tubes, 0.3mm inner diameter, 0.5mm outer diameter. 100mm length.
  • Convenient packaging with 1.5mm hole on cap for easy tube drawing without need of opening the cap or keeping it open all the time.
  • As shown in photos, approximate spotting volume as tested for dichloromethane is 20mm x (0.15mm)² x 3.14 = 1.5µL, for acetone is 30mm x (0.15mm)²x 3.14 = 2µL, and for water is 50mm x (0.15mm)² x 3.14 = 3.5µL.
  • Testing method used is placing the tube at a straight up angle with only the tip submerged in the liquid and allowing the liquid to keep on climbing until it stops.
  • With a relatively large quantity of 500 or 1500 tubes, at a highly affordable price, one can say goodbye to reusing capillary tubes in TLC spotting (or any other application), other than perhaps using both ends once each. Save the time, effort, washing solvent and risk of contamination, and focus on more important aspects of your research!
No. 2
OZCZKZZ 500-Pack Glass Capillary Tubes Melting Tubes,TLC Spotting Capillary Tubes,0.9mm ID 1.1mm OD 100mm Length,One Open End
  • Length is 10cm, outside diameter is 1.1mm, inside diameter is 0.9mm.
  • Made of borosilicate.
  • Pack of 500.
  • The transformation and change of crystal shape in the heating process can be observed, the initial melting temperature value and the total melting temperature value of the sample can be correctly read, and the boiling range value can be calculated
  • Use paper tube packaging,get convenient.
No. 3
Corning 9530-1 Pyrex Capillary Melting Point Tube, Both Ends Open, 1.5 mm-1.8 mm OD, 0.2 mm Wall Range (Pack of 100)
  • The package length is 2.3 centimeters
  • The package height is 17.1 centimeters
  • The package width is 9.7 centimeters
  • Package Weight : 0.029 kilograms

Why you should trust us?

This guide is the result of more than 10 years of experience in researching, testing, and writing about various subject. Our team members are experts in their fields. We spent 15 hours reading all the articles we could find online and all the customer reviews on various retail websites such as Amazon, Ebay, Alibaba or Flipkart. We also found many websites that provided valuable resources such as purchasing guides and detailed information on Capillary Lab Tubes. To help you make the best choice among the hundreds of products available, we decided to offer you a comparison in order to find the best value for your money. We searched different fields to find the best Capillary Lab Tubes. We also looked at the best alternatives for reasonably priced and easy to use products. After we determined our main parameters, we conducted our research and tests.These parameters separate a great product from an average one:

  • Price
  • Ease of use
  • Customer reviews
  • Quality
  • Durability

Conclusion

We hope this ranking was helpful to you in choosing the Capillary Lab Tubes that best suits you. We made it thoroughly and we will update it regularly, so that you get a real-time comparison. Our goal is to allow you to compare models and prices, to get an overview of what the market has to offer. We are here to make it easier for you and to make informed decisions. If our ranking gave you a clearer view on the different products available, feel free to let us know in the comments section. We will happily read them.

Click to rate this page !
Thanks !

Last update on 2022-10-05 at 16:06 / Affiliate links / Images from Amazon Product Advertising API