The 10 Best Engine Tilters to Buy – November 2021 Review

Looking for the best Engine Tilters?

We did 15 hours of research and testing 6 products to create this review. We believe the best Engine Tilters doesn’t have to be the most sophisticated to be exceptional. Our product selection lives up to its promise. Many different criteria were used for this comparison to be more relevant and more precise. Now discover our comparison !

TOP 10

SaleNo. 1
AFF Heavy Duty Steel Engine Tilter Accessory for Engine Crane, 1 Ton (2,000 lbs) Capacity, 582
  • Application: This impressive engine tilter works with the lifting chain to level out the engine weight by adjusting the angle the engine is held at, making lifting easier and safer
  • Use: The tool has a tough steel construction that resists corrosion; Used with all AFF model cranes and other common engine cranes to efficiently change an engine’s center-of-gravity when installing or removing from a vehicle
  • Capacity: Ideal for use in a range of situations and capable of hoisting even the heaviest of engine blocks; This tool has a 2,200 lb. weight capacity and a 23. 5" wide support bracket that can easily be attached to the engine for lifting security
  • Part number: 582
No. 2
Universal Cylinder Liner Puller Heavy Duty Diesel Engine Cylinder Liner Puller Fits for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” Bore, Replace for OEM PT-6400-C M50010-B 3376015
2 Reviews
Universal Cylinder Liner Puller Heavy Duty Diesel Engine Cylinder Liner Puller Fits for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” Bore, Replace for OEM PT-6400-C M50010-B 3376015
  • 【Application】Compatible with Mack Cummins Volvo Detroit International and other Cat Engines 3176, 3196, 3300 Series, 3400 Series, 3500 Series, C10, C12, C15, C16 Maxxforce DT, DT360, DTA360, DTA466, DT466, DT530 (PLN),DT466E, DT530E, DT570, HT570.
  • 【Direct Replacement】Replaces for OEM #PT-6400-C, M50010-B and 3376015. Easy to set up and operate, improves work efficiency and save your time and energy.
  • 【Novel & Upgrade Design】The spring-loaded feet of our liner puller can automatically adjust to fit the liner, reducing downtime and quickly recover the investment.
  • 【Powerful Function】 Used to safely & correctly remove the cylinder liners avoiding damage to the cylinder block. Works on wet liners from 3-7/8” to 6-1/4” bore, up to 15” deep, with a minimum wall thickness of .148.
  • 【Superior Material】Crafted from quality & heavy duty carbon steel, high strength, anti-wear, rust resistance, anti-oxidation, sturdy machined and welded steel structure ensure long-term and reliable performance.
SaleNo. 3
Sunex 5222 2-Ton Folding Engine Crane with Dual Pump Pistons
  • Dual pump pistons rapidly reach max height 25% faster than single pump designs
  • Low profile 4.7-inch legs designed to fit under wide range of vehicle frames including sports cars
  • 4 boom positions adjust for optimal reach based on required capacity
  • Drop-forged steel hook swivels 360 degrees for ease of use and safety during operations, while chainless design eliminates sway during lifting
  • Space-saving design folds to conveniently store away in small footprint
No. 4
Gen. 2 Hybrid (FM and Zigbee) E-Wand Starter Kit (Without CPC Bridge) - 3 Hybrid E-Wands and 1 Remote Control. Released June 2021
5 Reviews
Gen. 2 Hybrid (FM and Zigbee) E-Wand Starter Kit (Without CPC Bridge) - 3 Hybrid E-Wands and 1 Remote Control. Released June 2021
  • 1.Requires proper installation and programming prior to operation.
  • 2.NATIVE ZIGBEE – Pair E-Wands directly to third party Zigbee hubs, (compatible with Amazon Echo Plus and compatible with Samsung SmartThings). Use the CPC Bridge (included) to use the MyCurtains app and integrate with Google Home, Amazon Echo, IFTTT, etc.
  • 3.Motorize/Automate the tilt of blind slats. E-Wands retrofit onto existing horizontal blinds and wand-tilt vertical blinds. MUST USE TILT CONVERTER (SOLD SEPARATELY) TO CONVERT CORD TILT HORIZONTAL BLINDS. NOT COMPATIBLE WITH CORD OR CHAIN TILT VERTICAL BLINDS.
  • 4.These E-Wands are Gen 2 Hybrid with both FM and Zigbee communication. The included remote control is FM and can be paired to the E-Wands directly. The E-Wands can be added to or create a Zigbee mesh network for integration.
  • 5.Each E-Wand uses (6) AA Alkaline Batteries (included). INSERT BATTERIES POSITIVE END FIRST.
No. 5
OTC 2004 4,000 lb. Capacity Folding Engine Hoist / Shop Crane
  • OTC's 4,000 lb. capacity shop crane features a 4,000 lb. capacity with the boom fully retracted and a 1,000 lb. capacity with the boom at full extension
  • 46 inch maximum reach with boom fully extended, 25 inch maximum reach with boom fully retracted
  • Large 3-1/2 inch front wheels and 5-7/8 inch casters provide ease of mobility and allow fine tuning of crane position while in use
  • Quality materials and precision engineering ensure this crane will be a durable and productive piece of equipment in any garage or shop
  • Crane folds into a compact, upright package for storage - conserving valuable shop floor space when not in use
No. 6
Dragway Tools 2 Ton Folding Hydraulic Engine Hoist Cherry Picker Shop Crane Hoist Lift with 6 Fully Rotating Caster Wheels
  • Dragway Tools 2 Ton Folding Hydraulic Engine Hoist Cherry Picker Shop Crane Hoist Lift
  • (6) Fully Rotating 3" Steel Caster Wheels Easily allow for easy maneuverability
  • Working Dimensions: 65in x 41in x 37in
  • 5/16in. Hook on a 12in. Forged Steel Chain
  • Floor - 102in. Boom Range
No. 7
Black Widow 1-Ton Folding Shop Crane
  • Measures 63" L x 29.5" W x 58" H
  • 1-ton weight capacity
  • Boom arm extends from 36" -47.5"
  • Crane height adjusts from 64.75" ? 88.5"
  • Hook, chain, and ram included
No. 8
Trans-Dapt Performance 9099 Engine Tilter
  • Package Dimensions: 10.16 H x 96.52 L x 22.86 W (centimetres)
  • Country of Origin : United States
  • Fit type: Vehicle Specific
  • Package Weight: 0.022 pounds
No. 9
OTR Reset Tool | Cummins | 2006 - 2020 | Reset Aftertreatment System | Forced DPF Regen | Clear Active/Inactive Codes
59 Reviews
OTR Reset Tool | Cummins | 2006 - 2020 | Reset Aftertreatment System | Forced DPF Regen | Clear Active/Inactive Codes
  • START A FORCED DPF REGEN: A forced DPF regen is performed when a diagnostic scan tool, such as the OTR Reset Tool starts the regen process. The DPF soot load could be too high for a passive and active regen to occur causing the condition where it is required to perform a forced DPF regen.
  • RESET ENGINE LEARNED DATA: This will give you the relief you need knowing that you can make it to your destination safely while decreasing downtime.
  • WORKS ON PETERBILT / KENWORTH / VOLVO / FREIGHTLINER / INTERNATIONAL with Cummins ENGINES: You can replace engine related sensors over the road and just plug in the OTR Reset Tool to clear and reset the system.
  • RESET CHECK ENGINE LIGHT: Reset fault codes within 1 minute. Active or inactive. Note: if the code does come back it means its a serious issue and you need to take it to a repair shop.
No. 10
Earthquake 20015 Versa Front Tine Tiller Cultivator with 99cc 4-Cycle Viper Engine, 5 Year Warranty
  • VERSATILE - Tool-less removal of outer tines and shields quickly turns Versa from a tiller into a cultivator
  • EASY-TO-USE - Easy maneuverability - Light enough to turn on a dime with effortless control
  • STABILITY - Lowest center of gravity available in any front tine tiller for ground-hugging stability
  • CONVENIENT AND QUIET - Smooth pull recoil for an easy start
  • WARRANTY - 5-Year Limited

Intro

Find out where you can get the best Engine Tilters! Making your choice among different Engine Tilters on the market is not always easy. It can also turn into a daunting task because of the many websites offering the same type of product. On this page, we will give you a comparison to get the best value for your money. This complete ranking provides you with a comprehensive view and allows you to pick the best Engine Tilters. You will find a broad selection of models, brands, and prices. Whether you want to save money or find out what is the best Engine Tilters for you, our comparison will help you make the right choice. To keep things practical and easy to understand, we created a Top 10 of the best Engine Tilters. You won’t have to choose your products at random anymore.. On your marks! Compare! Pick your Engine Tilters!

Our Picks

SaleNo. 1
AFF Heavy Duty Steel Engine Tilter Accessory for Engine Crane, 1 Ton (2,000 lbs) Capacity, 582
  • Application: This impressive engine tilter works with the lifting chain to level out the engine weight by adjusting the angle the engine is held at, making lifting easier and safer
  • Use: The tool has a tough steel construction that resists corrosion; Used with all AFF model cranes and other common engine cranes to efficiently change an engine’s center-of-gravity when installing or removing from a vehicle
  • Capacity: Ideal for use in a range of situations and capable of hoisting even the heaviest of engine blocks; This tool has a 2,200 lb. weight capacity and a 23. 5" wide support bracket that can easily be attached to the engine for lifting security
  • Part number: 582
No. 2
Universal Cylinder Liner Puller Heavy Duty Diesel Engine Cylinder Liner Puller Fits for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” Bore, Replace for OEM PT-6400-C M50010-B 3376015
2 Reviews
Universal Cylinder Liner Puller Heavy Duty Diesel Engine Cylinder Liner Puller Fits for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” Bore, Replace for OEM PT-6400-C M50010-B 3376015
  • 【Application】Compatible with Mack Cummins Volvo Detroit International and other Cat Engines 3176, 3196, 3300 Series, 3400 Series, 3500 Series, C10, C12, C15, C16 Maxxforce DT, DT360, DTA360, DTA466, DT466, DT530 (PLN),DT466E, DT530E, DT570, HT570.
  • 【Direct Replacement】Replaces for OEM #PT-6400-C, M50010-B and 3376015. Easy to set up and operate, improves work efficiency and save your time and energy.
  • 【Novel & Upgrade Design】The spring-loaded feet of our liner puller can automatically adjust to fit the liner, reducing downtime and quickly recover the investment.
  • 【Powerful Function】 Used to safely & correctly remove the cylinder liners avoiding damage to the cylinder block. Works on wet liners from 3-7/8” to 6-1/4” bore, up to 15” deep, with a minimum wall thickness of .148.
  • 【Superior Material】Crafted from quality & heavy duty carbon steel, high strength, anti-wear, rust resistance, anti-oxidation, sturdy machined and welded steel structure ensure long-term and reliable performance.
SaleNo. 3
Sunex 5222 2-Ton Folding Engine Crane with Dual Pump Pistons
  • Dual pump pistons rapidly reach max height 25% faster than single pump designs
  • Low profile 4.7-inch legs designed to fit under wide range of vehicle frames including sports cars
  • 4 boom positions adjust for optimal reach based on required capacity
  • Drop-forged steel hook swivels 360 degrees for ease of use and safety during operations, while chainless design eliminates sway during lifting
  • Space-saving design folds to conveniently store away in small footprint

Why you should trust us?

This guide is the result of more than 10 years of experience in researching, testing, and writing about various subject. Our team members are experts in their fields. We spent 15 hours reading all the articles we could find online and all the customer reviews on various retail websites such as Amazon, Ebay, Alibaba or Flipkart. We also found many websites that provided valuable resources such as purchasing guides and detailed information on Engine Tilters. To help you make the best choice among the hundreds of products available, we decided to offer you a comparison in order to find the best value for your money. We searched different fields to find the best Engine Tilters. We also looked at the best alternatives for reasonably priced and easy to use products. After we determined our main parameters, we conducted our research and tests.These parameters separate a great product from an average one:

  • Price
  • Ease of use
  • Customer reviews
  • Quality
  • Durability

Conclusion

We hope this ranking was helpful to you in choosing the Engine Tilters that best suits you. We made it thoroughly and we will update it regularly, so that you get a real-time comparison. Our goal is to allow you to compare models and prices, to get an overview of what the market has to offer. We are here to make it easier for you and to make informed decisions. If our ranking gave you a clearer view on the different products available, feel free to let us know in the comments section. We will happily read them.

Click to rate this page !
Thanks !

Last update on 2021-11-10 at 08:43 / Affiliate links / Images from Amazon Product Advertising API