The 10 Best Powersports Handlebar Risers to Buy – %currentmonth% %currentyear% Review

Looking for the best Powersports Handlebar Risers?

We did 12 hours of research and testing 9 products to create this review. We believe the best Powersports Handlebar Risers doesn’t have to be the most sophisticated to be exceptional. Our product selection lives up to its promise. Many different criteria were used for this comparison to be more relevant and more precise. Now discover our comparison !

TOP 10

SaleNo. 1
Xitomer 22mm 7/8" Motorcycle Handlebar Risers With Clamps, ATV Dirt Bike Motocross, Fit for Honda Grom MSX125/ CRF250L, Yamaha FZ1/ FZ8/ FZ16, Kawasaki KLR650/ Z125, Suzuki DRZ 400/S MT-03(Black)
  • Perfect Fit for 7/8" 22mm Handlebars; (Please Make Sure the Size of Your Handlebar fit well before Buying It.) NOT Fit for 1" or 1+1/8" (They are Available in Other Listings of Our Shop), or 1+1/4".
  • Provides 25.8 mm (1 ") Higher, 20 mm (0.787") Backward and Forward Position from Stock Handlebar Position. Please Make Sure the Stock Wiring, Brake Hose, Brake Clutch Cable Length will work well before buying the riser. Of Course, It also Depends on Your Most Comfortable Riding Position.
  • Solid Construction But Light Weight: CNC Machined by Billet 6063-T6 Aluminum, and Anodized Surface Finish.
  • Easy to Install: Just Screw Out with the Allen Wrench, Each Package Comes with 4 PCS SUS304 Bolts to Screw the risers on (Size M8*1.25 Pitch).
  • Fit OEM Hole Center Size: 32mm(1.2598")-36mm(1.4173").
No. 2
kemimoto 7/8" Handlebar Risers 30mm Height for KLR650 ATV Dirt Bike (Black)
  • Perfect Fit for 7/8 inch Handlebars; NOT FIT FOR 1" or 1 1/8" (They are available in our shop too), or 1 1/4". Please Make Sure the Size of Your Handlebar before Placing Order. There is "Application Manual " at Technical Specification
  • Adaptation - These motorcycle handlebar risers fit almost all Dirt Bikes and Atv with 7/8" handlebars. Such as KLR 650, ATV, Dirt Bike, F650GS F800ST, etc.
  • High Quality - Our 7/8" risers are made from high-quality CNC aluminum with anti-rust bolts. Extend height, 30mm(1.2 inches)
  • Provide Comfortable - Extend 30mm(1.2 inches) height to provide you a comfortable riding position. Fits well and easy to install.
  • Risers allow you to change the location of the handlebars very easily, raising them up and pulling them back towards you more. Allowing for a more natural and comfortable riding position.
No. 3
Pivoting Handlebar Clamp Risers - APE Racing Billet Aluminum Universal Motorcycle 2" Raise Clamps For 7/8" or 1 1/8" Handlebars Mount To 7/8" Stem Clamp
  • ✔️HEAVEY DUTY - Made of billet 6061-T6 aluminum with completely CNC machined, hard anodized and blasting surface treatemt. We DON'T USE CASTING aluminum.
  • ✔️POLYMER ADAPTERS - APE Racing featured handlebar adapter made by high performance polymer which gives you the option of using either 7/8"(with adapter) bars or 1-1/8"(without adapter) taper bars.
  • ✔️RELIABLE AND DURABLE - APE Racing risers are designed for tough application. Each riser have 4 high grade stainless steel bolts to make sure max life time and safety.
  • ✔️FITMENT - 2 inch raise height; Fit for any machine with 7/8" bar clamps. ⚠️Please check the right size before purchase.
  • ✔️INCLUDES - 1 pair pivoting handlebar riser with adapters and 1 L-key wrench. Shipped in APE RACING retail packaging.
SaleNo. 4
PowerMadd 45590 Black 5"-8" Handlebar Risers
  • "fits both wide and narrow "t" steering posts"
  • "3" of adjustability"
  • adjusts quickly
  • includes all mounting hardware
  • easy install
  • Fit type: Vehicle Specific
No. 5
HONGK- Chrome Round 1" Handlebar Riser Clamp Compatible with Harley Kawasaki Suzuki Yamaha [B01BN0GWNY]
  • Specification:
  • Overall height 2 7/8", bar size 1", overall Dimension at head 2'' x 1 1/4", height from base to center of handlebar 2 ", overall diameter at base 1 1/8 ", thread at base 1/2" coarse (13 threads/inch).
  • No installation guide
  • color : the same like pictures show ,,,,,,,,,
No. 6
XKH- Black Shorty ROUND 1" Handlebar Riser Compatible with Harley Kawasaki Suzuki Yamaha [B011WPASFS]
  • Motorcycle Specification: Overall height 2 7/8", bar size 1", overall Diameter at head 1 7/8", height from base to center of handlebar 2 ", overall diameter at base 1 1/8 ", thread at base 1/2" coarse (13 threads/inch). new
  • EASY INSTALL , No installation guide
  • color : the same like pictures show
  • 100% brand new
  • Fitment: All Harley Davidson ,Cruisers ,Choppers ,Metrics with 2.5cm bar diameter , All Victory cruisers with 2.5cm bar diameter , , yamaha , kawasaki ,suzuki ….
No. 7
NEVERLAND 7/8" Handlebar Risers 30mm Height for Kawasaki Honda Suzuki Yamaha Ducati ATV Dirt Bike Black
  • Feature:Handlebar Supports with 30MM height,CNC-machined from high-strength aluminium alloy Premium quality, anodized surface finish
  • Fitment For most bikes with 22mm (7/8") diameter handlebars, these will raise your handlebars by 30mm.such as Kawasaki Honda Suzuki Yamaha Ducati and so on
  • Easy to install,No need to replace your handlebars for a more upright position
  • Heavy Duty- The handlebar risers are made from strong sturdy and reliable anti-rust 6063-T6 Aluminum material
  • 100% Satisfaction Service- If there any problems with the products, reach out to us for a quick solution. If there is any question, please feel free to reach out to us.
No. 8
Motorcycle Adjustable Pivoting Handlebar Clamp Risers Universal Fit Handle Bar Mount Bracket Clamps Riser Height For 7/8" 22mm or 1 1/8" 28mm Bar Mount Black Universal
  • ★【Universal】: Pivoting risers are incredibly universal that allows them to be clamped on most motor vehicles with 22mm to 28mm handlebar clamps. Fits for 1 1/8" and 7/8" handlebar.
  • ★【Adjustable】: Adjustable by 2 inch (55mm) height, the motorcycle bar riser can greatly increase driving comfort and effectively reduce fatigue during long driving.
  • ★【Benifit】: The motorcycle handlebar risers are made of complete Aluminum Alloy, CNC Machined, it is durable and antirust.
  • ★【Installation 】: The motorcycle riser is easy to install without drilling or welding, just twist the screws, it is convenient and quick, please check the Description for Instruction.
  • ★【Note】: Buy with confidence, If you have any question,please simply contact us for a replacement.THANKS !
SaleNo. 9
HONGK- 1'' inch Spike Handlebar Risers Compatible with Harley Cruisers Choppers Metrics Victory CHROMED [B01BN0EQSC]
  • Hole Diameter: 1"
  • Width: 1 3/4"
  • Total Height: 5 1/4"
  • Height from bottom to center of hole: 2 1/4"
  • Bottom Thread Mount: 10mm Coarse,Bolts included: 10mm Coarse Thread 2 3/4" Length,,THIS SET IS MADE FOR 1 INCH HANDLEBARS ONLY,These are aftermarket risers and will not fit on some models,Inspect your bikes design and determine if these will fit before purcashing.,Bolts included - 10mm Coarse Thread 2 3/4" Length,Use the measurements above to determine if the risers will fit,No Installation guide
No. 10
Rox Speed FX 7/8in. Pivoting Handlebar Riser - 2in. Deluxe Rise - 7/8in. Stem Clamp 3R-P2SSM
  • A great bar position solution and common choice for the XR650L, for Suzuki V-Strom, for BMW GS 1150 & 1100, KLR, DR-Z and many more.
  • Also a popular riser for anyone growing out of their current trail bike, from for Honda CRF70s to for Yamaha TTR125s and everything in between.
  • Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.

Intro

Find out where you can get the best Powersports Handlebar Risers! Making your choice among different Powersports Handlebar Risers on the market is not always easy. It can also turn into a daunting task because of the many websites offering the same type of product. On this page, we will give you a comparison to get the best value for your money. This complete ranking provides you with a comprehensive view and allows you to pick the best Powersports Handlebar Risers. You will find a broad selection of models, brands, and prices. Whether you want to save money or find out what is the best Powersports Handlebar Risers for you, our comparison will help you make the right choice. To keep things practical and easy to understand, we created a Top 10 of the best Powersports Handlebar Risers. You won’t have to choose your products at random anymore.. On your marks! Compare! Pick your Powersports Handlebar Risers!

Our Picks

SaleNo. 1
Xitomer 22mm 7/8" Motorcycle Handlebar Risers With Clamps, ATV Dirt Bike Motocross, Fit for Honda Grom MSX125/ CRF250L, Yamaha FZ1/ FZ8/ FZ16, Kawasaki KLR650/ Z125, Suzuki DRZ 400/S MT-03(Black)
  • Perfect Fit for 7/8" 22mm Handlebars; (Please Make Sure the Size of Your Handlebar fit well before Buying It.) NOT Fit for 1" or 1+1/8" (They are Available in Other Listings of Our Shop), or 1+1/4".
  • Provides 25.8 mm (1 ") Higher, 20 mm (0.787") Backward and Forward Position from Stock Handlebar Position. Please Make Sure the Stock Wiring, Brake Hose, Brake Clutch Cable Length will work well before buying the riser. Of Course, It also Depends on Your Most Comfortable Riding Position.
  • Solid Construction But Light Weight: CNC Machined by Billet 6063-T6 Aluminum, and Anodized Surface Finish.
  • Easy to Install: Just Screw Out with the Allen Wrench, Each Package Comes with 4 PCS SUS304 Bolts to Screw the risers on (Size M8*1.25 Pitch).
  • Fit OEM Hole Center Size: 32mm(1.2598")-36mm(1.4173").
No. 2
kemimoto 7/8" Handlebar Risers 30mm Height for KLR650 ATV Dirt Bike (Black)
  • Perfect Fit for 7/8 inch Handlebars; NOT FIT FOR 1" or 1 1/8" (They are available in our shop too), or 1 1/4". Please Make Sure the Size of Your Handlebar before Placing Order. There is "Application Manual " at Technical Specification
  • Adaptation - These motorcycle handlebar risers fit almost all Dirt Bikes and Atv with 7/8" handlebars. Such as KLR 650, ATV, Dirt Bike, F650GS F800ST, etc.
  • High Quality - Our 7/8" risers are made from high-quality CNC aluminum with anti-rust bolts. Extend height, 30mm(1.2 inches)
  • Provide Comfortable - Extend 30mm(1.2 inches) height to provide you a comfortable riding position. Fits well and easy to install.
  • Risers allow you to change the location of the handlebars very easily, raising them up and pulling them back towards you more. Allowing for a more natural and comfortable riding position.
No. 3
Pivoting Handlebar Clamp Risers - APE Racing Billet Aluminum Universal Motorcycle 2" Raise Clamps For 7/8" or 1 1/8" Handlebars Mount To 7/8" Stem Clamp
  • ✔️HEAVEY DUTY - Made of billet 6061-T6 aluminum with completely CNC machined, hard anodized and blasting surface treatemt. We DON'T USE CASTING aluminum.
  • ✔️POLYMER ADAPTERS - APE Racing featured handlebar adapter made by high performance polymer which gives you the option of using either 7/8"(with adapter) bars or 1-1/8"(without adapter) taper bars.
  • ✔️RELIABLE AND DURABLE - APE Racing risers are designed for tough application. Each riser have 4 high grade stainless steel bolts to make sure max life time and safety.
  • ✔️FITMENT - 2 inch raise height; Fit for any machine with 7/8" bar clamps. ⚠️Please check the right size before purchase.
  • ✔️INCLUDES - 1 pair pivoting handlebar riser with adapters and 1 L-key wrench. Shipped in APE RACING retail packaging.

Why you should trust us?

This guide is the result of more than 10 years of experience in researching, testing, and writing about various subject. Our team members are experts in their fields. We spent 12 hours reading all the articles we could find online and all the customer reviews on various retail websites such as Amazon, Ebay, Alibaba or Flipkart. We also found many websites that provided valuable resources such as purchasing guides and detailed information on Powersports Handlebar Risers. To help you make the best choice among the hundreds of products available, we decided to offer you a comparison in order to find the best value for your money. We searched different fields to find the best Powersports Handlebar Risers. We also looked at the best alternatives for reasonably priced and easy to use products. After we determined our main parameters, we conducted our research and tests.These parameters separate a great product from an average one:

  • Price
  • Ease of use
  • Customer reviews
  • Quality
  • Durability

Conclusion

We hope this ranking was helpful to you in choosing the Powersports Handlebar Risers that best suits you. We made it thoroughly and we will update it regularly, so that you get a real-time comparison. Our goal is to allow you to compare models and prices, to get an overview of what the market has to offer. We are here to make it easier for you and to make informed decisions. If our ranking gave you a clearer view on the different products available, feel free to let us know in the comments section. We will happily read them.

Click to rate this page !
Thanks !

Last update on 2021-06-20 at 19:03 / Affiliate links / Images from Amazon Product Advertising API