The 10 Best Towing Bumper Hitches to Buy – September 2022 Review

Looking for the best Towing Bumper Hitches?

We did 18 hours of research and testing 8 products to create this review. We believe the best Towing Bumper Hitches doesn’t have to be the most sophisticated to be exceptional. Our product selection lives up to its promise. Many different criteria were used for this comparison to be more relevant and more precise. Now discover our comparison !

TOP 10

No. 1
RV Bumper Hitch 2-in Receiver Adapter for 4 x 4 inches Square Bumper Beam Level Trailer Towing Purpose
  • Upgrade the design: Universal, applicable to different width and height of the steel beam, the most important thing is that according to the diferent steel beam, has the adjustment function, can tightly lock the steel beam does not shake ! Patented products, please do not imitate !!
  • DEPENDABLE STRENGTH: This RV trailer hitch is rated for 3, 500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools.
  • PACKAGE: Camper RV bumper hitch, Instructions, 4 bolts included for Mounting hardware.
SaleNo. 2
TOPTOW RV Bumper Hitch Receiver 63801 for 4 inch to 4.5 inch Beams, 2 inch Receiver Opening, Fits for Bike Racks, Cargo Carriers Camper-on
344 Reviews
TOPTOW RV Bumper Hitch Receiver 63801 for 4 inch to 4.5 inch Beams, 2 inch Receiver Opening, Fits for Bike Racks, Cargo Carriers Camper-on
  • ATTENTION: This RV Hitch Adapter is NOT Intended for RV Level Towing Purpose
  • [STANDARD FIT] This hitch receiver has 2" x 2" tube opening. Fits most of bike racks, cargo carriers with 2" shank. It has a 200 lbs tongue weight capacity. 5/8" hitch pin or hitch lock not included
  • [EASY TO INSTALL] It has 4 full threaded bolts and nuts. It can be easily mounted on your RV bumpers. Fits most of 4" to 4-1/2" Continuous Steel Bumper Beams (Can be Mounted Upside Down). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • [DEPENDABLE STRENGTH] Made of heavy duty steel construction. Robotically weld provides more secure
  • [CORROSION RESISTANCE] For long term use, this hitch adapter is protected by a durable black powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances
SaleNo. 3
TOPTOW 63803 RV Bumper Hitch Receiver 2 inch Adapter Receiver Openning 3500 LBS Capacity Fits for 4 inch X 4 inch Square RV Rear Bumpers
400 Reviews
TOPTOW 63803 RV Bumper Hitch Receiver 2 inch Adapter Receiver Openning 3500 LBS Capacity Fits for 4 inch X 4 inch Square RV Rear Bumpers
  • This Accessories is used for RV Level Towing Purpose
  • Allows 350 Ibs Tongue Weight Capacity
  • Simplified Installation Fits: 4 inch X 4 inch Square Bumpers (Can be Mounted Upside Down)
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • 2 set of Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
No. 4
Steel Trailer Towing Hitch Step Fits 2 Inch Receiver,Rear Bumper Guard | 36"Wide X 4"OD (Black)
  • Made of Heavy Duty Steel Construction for Maximum Strength & Safety
  • Extended Section to Assist with Stepping into Truck Bed.Anti Rattle Stabilizer Kit
  • Load Bearing:350 Lbs Weight Capacity
  • Easy Installation: Bolt-On Installation,No Drilling Need
  • Package Include: 1 X Trailer Tow Hitch Step Bar,1 X Hitch Pin & Clip,1 X Stabilizer Bracket,Hardware as Shown in the Picture Above
No. 5
TLAPS 7422445151162 Universal For 2" x 2" Towing Receiver Chrome 3 Inch Trailer Tow Mount Rear Hitch Step Bar Bumper Guard
  • Application: Universal Fit For Trailer Hitch With A 2" x 2" Receiver Tube Opening ( Will Fit Most Class 3, Some Class 2 / 4 Trailer Hitch )
  • 3" Rear Hitch Step Bar ( Pin & Clip Are Not Included )
  • Classic Style Rear Hitch Step Bar, Receiver Size: 2" Receiver Tube
  • Heavy Duty Stainless Steel
  • Chrome
SaleNo. 6
KAYCENTOP Universal Hitch Step Anti Slip and Rust Towing Bumper Guard Black Hitch Steps for Most Cars SUV Trucks Pickups with Pin Fits 2 Inch Receivers
  • UNIVERSAL --- Bump step can be mounted to any vehicle with a standard 2 in. Receiver trailer hitch; Step pad is 11-4/5” in length and 4” wide, 6” tube with 5 holes for adjustable length, Hitch hole 1/2 inch; Weight Capacity: 220 LBS.
  • PREMIUM MATERIAL --- This hitch step is made of solid iron with durable black ED coating + powder coat finish for long-lasting corrosion resistance. It offers all-weather protection for your car's bumper.
  • APPLICABLE SCOPE --- To truck beds, roof racks and SUV interiors. Once secured, the hitch cover provides access to your truck bed, roof racks, and in the case of an SUV, the rear cargo area.
  • EASY INSTALLATION --- Use of a plug-and-play helps with quick, effortless installation. Once installed, the rubber pad of the multi-purpose utility step ensures users get a secure, comfortable footing at all times.
  • CLIENT SUPPORT --- 30 DAYS money back and 1 YEAR warranty, feel free to contact us for any issue.
No. 7
ONINE Texture Black Universal Hitch Step with Hitch Lock and Stabilizer Fit 2” Receiver Trailer Truck Towing Hitch Step Bar Rear Bumper Guard
  • Fits on all 2 inch hitch receiver. Weight Capacity: 350 LBS. Easy plug in installation
  • Free pin lock & stabilizer are included
  • Heavy-duty steel tubing; Dual stage powder coated textured black finish;Solid All-Welded Design & Construction for Maximum Strength & Safety
  • 30" Wide X 2" Round Step Bar, Lowered 1.5" OD Step Bar with Raised Step Pad, Extended Section to Assist with Stepping into Truck Bed
  • Limited lifetime warranty against manufacturing defects (May Interfere with backup sensor in some rare cases)
SaleNo. 8
HITOWMFG Drop-Down Bumper 2 inch Receiver Adapter for 4x4 inch Bumper Trailer Towing Cargo Carrier Bike Racks
730 Reviews
HITOWMFG Drop-Down Bumper 2 inch Receiver Adapter for 4x4 inch Bumper Trailer Towing Cargo Carrier Bike Racks
  • Fits 4" x 4" RV or travel trailer bumper, use for both downside and upside
  • Accepts hitch mount of 2" shank such as bike racks, RV tire carriers, cargo carriers or other accessories, could offer a low hitch mount to provide RV trailer towing
  • Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight, Do NOT use for towing purposes
  • Finished in black podwer coating provide durable and strong conditions, resist dust and corrosion, adds extra durability
  • Heavy duty steel via robotically welded for superior strength provide excellent mounting facility, high quality hardware fittings, all make this adjustable trailer hitch more durable
No. 9
CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs
  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools
SaleNo. 10
Towever 83801 RV Bumper Hitch Receiver 2 inches Adapter for 4-4.5 inches Travel Trailer Rear Bumper
  • This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )
  • For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity
  • The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL
  • The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish
  • The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper

Intro

Find out where you can get the best Towing Bumper Hitches! Making your choice among different Towing Bumper Hitches on the market is not always easy. It can also turn into a daunting task because of the many websites offering the same type of product. On this page, we will give you a comparison to get the best value for your money. This complete ranking provides you with a comprehensive view and allows you to pick the best Towing Bumper Hitches. You will find a broad selection of models, brands, and prices. Whether you want to save money or find out what is the best Towing Bumper Hitches for you, our comparison will help you make the right choice. To keep things practical and easy to understand, we created a Top 10 of the best Towing Bumper Hitches. You won’t have to choose your products at random anymore.. On your marks! Compare! Pick your Towing Bumper Hitches!

Our Picks

No. 1
RV Bumper Hitch 2-in Receiver Adapter for 4 x 4 inches Square Bumper Beam Level Trailer Towing Purpose
  • Upgrade the design: Universal, applicable to different width and height of the steel beam, the most important thing is that according to the diferent steel beam, has the adjustment function, can tightly lock the steel beam does not shake ! Patented products, please do not imitate !!
  • DEPENDABLE STRENGTH: This RV trailer hitch is rated for 3, 500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools.
  • PACKAGE: Camper RV bumper hitch, Instructions, 4 bolts included for Mounting hardware.
SaleNo. 2
TOPTOW RV Bumper Hitch Receiver 63801 for 4 inch to 4.5 inch Beams, 2 inch Receiver Opening, Fits for Bike Racks, Cargo Carriers Camper-on
344 Reviews
TOPTOW RV Bumper Hitch Receiver 63801 for 4 inch to 4.5 inch Beams, 2 inch Receiver Opening, Fits for Bike Racks, Cargo Carriers Camper-on
  • ATTENTION: This RV Hitch Adapter is NOT Intended for RV Level Towing Purpose
  • [STANDARD FIT] This hitch receiver has 2" x 2" tube opening. Fits most of bike racks, cargo carriers with 2" shank. It has a 200 lbs tongue weight capacity. 5/8" hitch pin or hitch lock not included
  • [EASY TO INSTALL] It has 4 full threaded bolts and nuts. It can be easily mounted on your RV bumpers. Fits most of 4" to 4-1/2" Continuous Steel Bumper Beams (Can be Mounted Upside Down). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper
  • [DEPENDABLE STRENGTH] Made of heavy duty steel construction. Robotically weld provides more secure
  • [CORROSION RESISTANCE] For long term use, this hitch adapter is protected by a durable black powder coating finish. These topcoats resist rain, dust, snow, road salt, and other corrosive substances
SaleNo. 3
TOPTOW 63803 RV Bumper Hitch Receiver 2 inch Adapter Receiver Openning 3500 LBS Capacity Fits for 4 inch X 4 inch Square RV Rear Bumpers
400 Reviews
TOPTOW 63803 RV Bumper Hitch Receiver 2 inch Adapter Receiver Openning 3500 LBS Capacity Fits for 4 inch X 4 inch Square RV Rear Bumpers
  • This Accessories is used for RV Level Towing Purpose
  • Allows 350 Ibs Tongue Weight Capacity
  • Simplified Installation Fits: 4 inch X 4 inch Square Bumpers (Can be Mounted Upside Down)
  • Sturdy Steel Construction, and Robotically Welded Steel Bumper
  • 2 set of Bolts Need to be Secure Tightly Around the Travel Trailer Bumper

Why you should trust us?

This guide is the result of more than 10 years of experience in researching, testing, and writing about various subject. Our team members are experts in their fields. We spent 18 hours reading all the articles we could find online and all the customer reviews on various retail websites such as Amazon, Ebay, Alibaba or Flipkart. We also found many websites that provided valuable resources such as purchasing guides and detailed information on Towing Bumper Hitches. To help you make the best choice among the hundreds of products available, we decided to offer you a comparison in order to find the best value for your money. We searched different fields to find the best Towing Bumper Hitches. We also looked at the best alternatives for reasonably priced and easy to use products. After we determined our main parameters, we conducted our research and tests.These parameters separate a great product from an average one:

  • Price
  • Ease of use
  • Customer reviews
  • Quality
  • Durability

Conclusion

We hope this ranking was helpful to you in choosing the Towing Bumper Hitches that best suits you. We made it thoroughly and we will update it regularly, so that you get a real-time comparison. Our goal is to allow you to compare models and prices, to get an overview of what the market has to offer. We are here to make it easier for you and to make informed decisions. If our ranking gave you a clearer view on the different products available, feel free to let us know in the comments section. We will happily read them.

Click to rate this page !
Thanks !

Last update on 2022-09-27 at 04:26 / Affiliate links / Images from Amazon Product Advertising API